Updated October 2026
Quick facts
| Service call | $85 — credited toward the repair when you proceed |
|---|---|
| Warranty | 30-day labor · 90 days on parts we supply |
| Credentials | BEAR #A 50636 · EPA Section 608 Universal |
| Hours | Mon–Fri 09:00–19:00 Sat–Sun 10:00–16:00 |
About appliance service in Burbank
Burbank borders Toluca Lake, where we are based. The Media District (around Warner Bros. and the Disney lot) mixes condos, apartments, and rentals with busy production-industry households — mainstream Samsung/LG/Whirlpool installs and property-manager coordination. Magnolia Park's 1940s-50s bungalows bring older wiring, shared circuits, and long-serving Whirlpool, GE, and Maytag appliances. Burbank Hills homes skew larger with premium upgrades. The Rancho District, near the LA Equestrian Center, is a horse-keeping neighborhood of single-family homes with typical family installations.
Neighborhoods served: Media District, Magnolia Park, Burbank Hills, Rancho District.
ZIP codes: 91501, 91502, 91504, 91505, 91506.
Burbank appliance repair — we’re based next door
Our home base is Toluca Lake, directly adjacent to Burbank — the city line is one neighborhood over. Ask about available appointments; timing depends on scheduling and parts. We cover every Burbank ZIP (91501, 91502, 91504-91506), and the $85 service call is credited toward the repair.
Media District — studios, condos, busy households
The blocks around Warner Bros. and the Disney lot mix condos, apartment buildings, and rental homes with production-industry households that can’t wait a week for a working washer. We handle tenant and property-manager coordination routinely and provide a certificate of insurance when a building requires it. Mainstream installs dominate here — Samsung, LG, Whirlpool, GE.
Magnolia Park — vintage housing, vintage wiring
Magnolia Park’s 1940s-50s bungalows are one of Burbank’s signatures, and they come with era-specific quirks: two-prong outlets, shared kitchen circuits, and wiring that predates modern appliance loads. A tripping breaker or intermittent dryer fault here is as often the circuit as the machine — we diagnose both before recommending anything. Long-serving Whirlpool, GE, and Maytag units are common, alongside newer appliances in remodeled kitchens.
Valley heat and hard water
Burbank summers get hot, and refrigerators pay the price — compressors run near-continuously, dirty condenser coils overheat, and marginal fans fail on the hottest week of the year. We also see the Valley’s hard water constantly: scale on dishwasher heating elements, clogged ice-maker inlet valves, mineral film on glassware. Descaling and valve replacement fix most of it; an AC tune-up before summer keeps the rest of the house comfortable too.
Rancho District and Burbank Hills
The Rancho District near the LA Equestrian Center is a rare horse-keeping neighborhood of single-family homes — typical family installations, easy access. Burbank Hills homes run larger, with premium upgrades appearing in newer kitchens. We serve both areas; ask about appointment availability.
Furnaces and AC too
Besides appliances, we service furnaces and offer AC tune-ups. The Goodman furnace in the job cards below is one Burbank example.
Call (213) 205-2055
Or text a photo of the model plate. Burbank borders Toluca Lake, so it is part of our core coverage.
Documented jobs in Burbank
-
LG refrigerator warm, 15 PSI where there should be a vacuum
- What the customer saw
- An LG refrigerator in Burbank had stopped cooling. Its compressor still ran, but it rattled, and the low side read 15 PSI where an R600a system should sit in a vacuum.
- What we found
- The pump inside the linear compressor had failed and spread metal particles through the sealed system.
- What we did
- We installed a new LG compressor, flushed all the circuits with acetone and nitrogen, updated the control board and re-brazed a pinhole leak a nitrogen test found. It ran at -7.1 PSI.
-
Goodman furnace that couldn't sense its flame
- What the customer saw
- A Goodman furnace in Burbank wasn't sensing its flame. Without that signal, the control board can't tell that the burners are lit, so it shuts the gas off.
- What we found
- A flame sensor is a simple part: a metal rod, an insulator and one wire. The rod and its wiring checked out, which left the circuit on the board that reads the flame current.
- What we did
- We replaced the control board. The sensor is the simple part, so it was checked first, and the board was the conclusion once it was cleared.
Our recent work in Burbank
Frequently asked questions
-
Do you charge extra to come to Burbank?
No. Our base is in Toluca Lake, directly adjacent to Burbank — you're one of our closest service areas, not an outlying one. Same $85 service call as everywhere we work, credited toward the repair when you proceed.
-
How fast can you reach Burbank?
Our base is in Toluca Lake, directly next door — Media District and Magnolia Park are closest, Burbank Hills and the Rancho District a little farther out. Ask about available appointments; timing depends on scheduling and parts, with a real arrival window.
-
What appliances are common in Magnolia Park's vintage homes?
The 1940s-50s bungalows often keep long-serving Whirlpool, GE, and Maytag units, with Samsung and LG appearing in remodels. The bigger factor is the era's electrical: two-prong outlets, shared kitchen circuits, and aging wiring can mimic appliance faults — we check the circuit before condemning the machine.
-
Does Burbank's hard water damage appliances?
Hard Valley water builds scale in dishwashers (heating elements, spray arms), ice makers (small water lines and inlet valves), and water heaters. If your dishwasher leaves white film or your ice tastes off, scale is the usual suspect — we descale, replace clogged valves, and advise on rinse-aid and filter habits.
-
Do you work with Media District rentals and production households?
Yes. Condos, apartments, and rental homes near the studios are a big share of our Burbank calls. We coordinate with property managers and tenants on scheduling, and provide a certificate of insurance ($1M GL) when building management requires one.
-
My refrigerator struggles during Burbank heat waves — is that normal?
Hot Valley summers make refrigerators run near-continuously, exposing weak compressors, dirty condenser coils, and failing fans. If your fridge can't hold temperature on hot days, have it checked before peak season — a coil cleaning or fan replacement is far cheaper than a compressor lost to heat stress.
-
Service call cost?
$85, credited toward the repair when you proceed. Flat-rate quote upfront before any work. 30-day labor warranty.
Google reviews
★★★★★
Ivan at Epic Star did a great job installing my window air conditioner unit. He was responsive, on time, good at troubleshooting and wasted no time. I’d definitely use this appliance repair service again.
★★★★★
Super great service. Was able to call and get an appointment same day. Super friendly people. Will hire again !
★★★★★
Super happy with the service! I had three mini-split units with tons of mold and buildup inside, and it was surprisingly hard to find someone willing to clean them properly. Ivan did a very thorough job. He took the units apart, cleaned deep inside. The difference afterward is huuuuuuuuge! What also stood out was how considerate he was in the house. He wore shoe covers so he wouldn’t track anything inside and was careful to leave everything clean. We also happened to have an issue with our stove/spark module, I asked him about it, and he casually fixed it for us at no extra charge (!) Very professional, careful, and super easy to work with. I’d definitely recommend him if you need a real deep cleaning for mini-splits, especially if there’s mold or heavy buildup. 10/10 Easy
Appliance trouble in Burbank? We're on it.
Or text a photo of your appliance so we can bring the right part to Burbank.
(213) 205-2055