Skip to main content

Mini-Split Cleaning in Valley Village

A wall-mounted Daikin in Valley Village leaked water into the room. Dust, slime and mold kept the water from its condensate pump, and a cleaning got it working again with no new parts.

Call or text a photo of the issue. $85 service call, credited to your repair. Online booking in English and Spanish.

Daikin mini-split mounted on the wall after the condensate pump was cleaned and put back in
Daikin mini-split in Valley Village that leaked water into the room; dust, slime and mold had kept the water from reaching its condensate pump.
California BEAR Registered 30-day labor / 90-day warranty on parts we supply $85 service call, credited to your repair Book online in English or Español

Mini-split jobs we've documented in Valley Village

  • Daikin mini-split leaking: no water reached its pump

    What the customer saw
    Water was leaking out of a wall-mounted Daikin mini-split into the room. It sat level, and test water ran out the right corner.
    What we found
    Dust, slime and mold had plugged the drain pan outlet and the small rubber hose to the condensate pump's reservoir. The mesh filter in the reservoir was packed with dirt.
    What we did
    We washed the pump and its reservoir, cleaned the drain pan with a mold killer and added a drain tablet. On the test the pump cycled normally. No parts were replaced.

    Watch: a real job in Valley Village

    Daikin mini-split leaking: no water reached its pump

Recent jobs in the area

Drain hose removed from a mini-split, with sludge blocking the drain pan outlet and water dripping into a basin
Same job: the drain hose pulled off the pan, with dust, slime and mold plugging the outlet.📍 Valley Village

Quick facts

Service call $85 — credited toward the repair when you proceed
Warranty 30-day labor · 90 days on parts we supply
Credentials BEAR #A 50636 · EPA Section 608 Universal
Hours Mon–Fri 09:00–19:00
Sat–Sun 10:00–16:00

Updated November 2026

A Valley Village mini-split leaking water into the room

The Daikin job in Valley Village started with water coming out of a wall-mounted indoor unit into the room. The video of that job shows the whole cleaning and the test.

The first checks

We put a level on the indoor unit, and it sat level. Then we took the filters out and poured in a little water from a bottle. It ran out the right corner.

What was under the cover

With the plastic housing off, the pan had a lot of dust and dirt in it, and the coil was dirty too. Next to the coil sat a compact condensate pump. Water from the pan drains into the pump’s small reservoir, a float rises with it, and the pump empties the reservoir.

Blue condensate pump hidden under the Daikin mini-split, right next to the coil.

Dust, slime and mold had plugged the drain pan outlet and the small rubber hose between the pan and the reservoir. Inside the reservoir, the mesh filter was packed with dirt. No water could reach the pump, so it stopped pumping.

Condensate pump held over a basin, its mesh filter and rubber elbow packed with dirt.

Cleaning and the test

We washed the pump and its reservoir, cleaned the drain pan with a cleaner that kills mold and added a tablet that keeps the drain line clean. Then we put water into the pan. It reached the reservoir, the pump turned on, emptied it and went back to standby. No parts were replaced. The coil was dirty too, so wash the filters more often.

Gloved hand spraying water over the coil so it runs into the drain pan, to test the drain after cleaning.

What a mini-split cleaning covers

A cleaning visit opens the head and washes the coil and blower wheel in place, with a cleaning bag under the unit and the runoff draining down a hose into a bucket. It also covers the filters, the drain pan and the condensate line. A new filter doesn’t reach the pan, where water collects and mold can grow. Cleaning typically runs $150–$450 per indoor unit, depending on its size and condition, and additional units on the same visit are discounted. The details are on our mini-split cleaning page.

Similar jobs in other areas

In Hollywood Hills, a Carrier mini-split leaked because the sponge filter in its condensate pump’s reservoir was clogged solid. A Blueridge in Woodland Hills had no pump at all, and mold mixed with dust had packed its drain line. Over in Granada Hills, a musty Daikin had mold in its drain pan.

If water is coming out of your indoor unit, text a photo of where it shows up. Call or text (213) 205-2055.

Frequently asked questions

  • Why was the Daikin mini-split in Valley Village leaking water?

    The water couldn't reach its condensate pump. Dust, slime and mold had plugged the drain pan outlet and the small rubber hose to the pump's reservoir, and the mesh filter in the reservoir was packed with dirt. With the drain path blocked, the water ran out of the indoor unit instead.

  • Did the condensate pump have to be replaced?

    No. We washed the pump and its reservoir, cleaned the drain pan with a mold killer and added a tablet that keeps the drain line clean. On the test the pump turned on, emptied the reservoir and shut off. No parts were replaced.

  • What does a mini-split cleaning include?

    The head is opened and the coil and blower wheel are washed in place, with a cleaning bag under the unit and the runoff draining into a bucket. The visit also covers the filters, the drain pan and the condensate line, and we check airflow and drainage before leaving.

  • How much does mini-split cleaning cost in Valley Village?

    Cleaning typically runs $150–$450 per indoor unit, depending on its size and condition. Additional units cleaned on the same visit are discounted, and you get the price before we start. The visit is an $85 service call, credited toward the cleaning if you go ahead.

  • How often should a mini-split be cleaned?

    A professional cleaning every one to two years for most homes, yearly for homes with pets. Between visits, rinse the filters yourself every four to six weeks. On the Valley Village Daikin the coil was dirty too, so we advised washing the filters more often.

  • Can I clean the mini-split myself?

    Partly. You can rinse the filters. Washing the coil and blower wheel, or taking a condensate pump and its reservoir apart, means opening the head next to its control board and wiring, with the power off at the breaker, so leave that part to a technician.

Same-day service

Book a diagnostic/repair visit

Please enter your name.
Enter a valid 10-digit US phone number
Please enter a valid email.
Please enter your city or ZIP.
Use JPG, PNG, or WebP — max 3 × 5MB.
No spam, ever Background-checked techs

Mini-Split Cleaning in Valley Village — let's get it scheduled

Or text a photo so we can bring the right part.