Skip to main content

Viking range hood in Studio City: removing the two blowers the customer couldn't get out

She was cleaning her stainless Viking wall-mount hood and couldn't get its two blowers out, so she called us to remove them.

November 17, 2026 · 4 min read · By Epic Star Service Team

Stainless Viking wall-mount range hood with a small blue badge on its front, over a teal tile backsplash, with wood cabinets on the right and boards leaning against the tile below.
In this guide

Two blowers she couldn’t get out

In October 2026, we worked on a fairly old stainless Viking range hood in Studio City. It’s a wall-mount hood with two blowers. The customer had been cleaning it herself and couldn’t get the two blowers out.

We don’t offer range hood cleaning as a service; she called us to get the blowers out and asked us to wash the wheels while they were out.

Both wheels coated in grease

Looking up into the hood before we started, you could see both blower wheels in place and coated in grease. The damper flaps behind them had turned yellow-brown with it.

Looking up into a stainless range hood: two greasy blower wheels in place, one on a red ring and one on a white ring, with yellow-brown damper flaps behind them and a light strip along the front edge
Before the work: both blower wheels in place and coated in grease. Behind them, the damper flaps are yellow-brown with it.

Taking both blowers out

We removed both blower assemblies, each one a motor with its blower wheel, and carried them outside. Inside the wheels, the grease had built up over many years into a thick layer.

Gloved hand holding a range hood blower with a red ring outdoors on wet pavement, the inside of its wheel caked with brown grease, a second blower with a white ring standing behind it and a pump sprayer in front
Outside, one blower in a gloved hand, the inside of its wheel caked with brown grease. The second blower stands behind it, with a pump sprayer in front.

Several rounds outside

At the customer’s request, we washed the wheels outside; we don’t offer range hood cleaning as a service. We alternated a cleaning foam and a coil cleaner over several rounds until the grease came off completely.

Two range hood blowers standing on wet pavement with white cleaning foam over their wheels and brown runoff spreading around them
Both blowers in cleaning foam, with brown runoff of dissolved grease on the pavement.

By the last round, neither wheel had any grease left on it.

Two black blower wheels side by side on stone pavement at night, lit by a camera flash, with small white patches of flaking paint
Both wheels after the last round, before they went back in. The white patches are old paint flaking off with age.

Back in the hood

We put both blowers back in. The wheels went in clean, with no grease on them, and the airflow got stronger. No parts were replaced.

Both blowers back inside the stainless range hood with clean black wheels, one on a red ring and one on a white ring, and greasy damper flaps behind them
Both blowers back in the hood with clean wheels. The damper flaps behind them still show grease; the job was the two blowers.

If your hood moves less air than it used to

Start with the grease filters under the hood. Clogged filters cut suction, and you can wash or replace them yourself. If the filters are clean, the cause can be grease on the blower wheels, a damper that doesn’t open, a failing blower motor or a blocked duct.

Before you reach inside, switch off the power to the hood and check your model’s manual. If the blowers won’t come out, don’t force them.

Range hood repair in Studio City

Epic Star Appliance Repair and HVAC repairs range hoods, Viking included, in Studio City and across Los Angeles. See also range hood repair in Studio City. Our other written-up Viking job is a built-in refrigerator in Bel Air that kept losing its refrigerant through a leaking evaporator. On range hoods, the $85 service call is credited toward the work when you go ahead, and our 30-day labor warranty covers it. CA BEAR registered (#A 50636). If your hood’s fan won’t run or its blowers have to come out, call or text (213) 205-2055 and send a photo of the hood.

FAQ

Can you take the blowers out of a range hood?

Yes. A customer in Studio City couldn't get the two blowers out of her stainless Viking wall-mount hood in October 2026, so she called us. We removed both blower assemblies, each a motor with its wheel, and put both back in without replacing any parts.

Have you worked on a Viking range hood?

Yes, on a fairly old stainless Viking wall-mount hood with two blowers, in Studio City, in October 2026. The customer couldn't get the blowers out, so we removed both and put them back in. No parts needed replacing.

Why does a range hood move less air than it used to?

Check the grease filters first, since clogged filters cut suction. Past the filters, grease on the blower wheels, a damper that doesn't open, a failing blower motor or a blocked duct can each reduce the airflow.

What should I do before reaching into a range hood?

Switch off the power to the hood first, and check your model's manual before you take anything apart. If the blowers won't come out, don't force them; call us instead.

Did any parts need replacing on this hood?

No. Both blowers went back into the hood with the same motors and wheels.

Do you repair range hoods in Studio City?

Yes, in Studio City and across Los Angeles. A range hood visit starts with the $85 service call, credited toward the work when you go ahead, and our 30-day labor warranty covers it. Call or text (213) 205-2055 and send a photo of the hood.

Got an appliance that needs fixing? We cover LA and the Valley.

Call (213) 205-2055 or text a photo of your appliance.