Stove & Range Repair in Los Angeles
Freestanding ranges, slide-in ranges, gas cooktops, electric cooktops, induction. Premium specialty: Wolf, Viking, Thermador, Bertazzoni, Miele.
$85 service call credited toward repair · 30-day labor / 90-day warranty on parts we supply
Updated November 2026
Quick facts
| Service call | $85 — credited toward the repair when you proceed |
|---|---|
| Warranty | 30-day labor · 90 days on parts we supply |
| Credentials | BEAR #A 50636 · EPA Section 608 Universal |
| Hours | Mon–Fri 09:00–19:00 Sat–Sun 10:00–16:00 |
Professional ranges
Wolf, Viking, Thermador, Bertazzoni. We carry common parts.
Gas, electric, induction
All three cooktop technologies. Induction control board specialists.
Surface burners & ovens
Sparking, weak flame, electric burner heat output, control knob issues — full coverage.
Appointment availability
Ask about available appointments; timing depends on scheduling and parts.
$85 service call, credited toward the repair
$85 fee credited toward the repair when you proceed.
Book online in Spanish
Online booking in both languages.
Why does my gas burner burn with a weak yellow flame?
A healthy gas flame is crisp and blue; a lazy yellow one means the burner isn’t getting the right air-to-gas mix. Burner ports clogged with food or a misadjusted air shutter can cause it, and on premium ranges like Wolf so can a regulator issue or the wrong LP-versus-natural-gas setting after a move. It needs an on-site check before it’s pinned on a part or an adjustment; don’t try to adjust gas components yourself.
How Epic Star fixes stoves and ranges in Los Angeles
We service gas, electric and induction ranges and cooktops, including professional ranges: Wolf dual-fuel, Viking 36”/48” Professional, Thermador Pro Grand, Bertazzoni Master. These ranges have specific repair characteristics — sealed burner tops with specific igniter geometries, dual-fuel oven controls that bridge electric and gas systems, knob-valve assemblies that wear differently from consumer ranges.
We service these brands across Beverly Hills, Bel Air, Brentwood, and Pacific Palisades. On a Thermador range in the Hollywood Hills that showed E0210, the cause was a Wi-Fi module corroded by cleaner that had dripped through the gaps in the top. Our service van carries parts for them: Wolf spark modules, Viking igniters, Thermador knob assemblies, Bertazzoni burner caps.
Symptoms we diagnose
Symptoms we handle include a gas burner that won’t ignite (dirty or wet spark electrode, failed igniter module, or a misaligned burner cap); a weak or yellow flame (clogged burner ports from spilled food, or a misadjusted air shutter); an electric burner that won’t heat (a burned-out element or failed infinite switch); an induction cooktop that won’t recognize pans (a non-magnetic pan, a failed coil, or a control-board fault); and a loose control knob (a worn shaft, a broken valve stem on gas, or a worn infinite switch on electric). See the FAQ above for full self-diagnosis guidance before you call.
Gas, electric, induction — all serviced
Each technology needs different tests, and the symptom alone doesn’t identify a part. Premium induction units have failure modes specific to the inverter electronics. Don’t adjust gas components, electrical connections or internal controls before the diagnosis.
Diagnostic-first pricing
The $85 service call is credited toward any completed repair. You get a flat-rate written quote before work begins — not an hourly estimate — and a 30-day labor warranty on every job (parts we supply are warranted for 90 days). Ask about available appointments; timing depends on scheduling and parts. Epic Star is an independent specialist, California BEAR registered (#A 50636), carrying $1M general liability insurance, with 1,371+ repairs completed since 2024.
Call (213) 205-2055
Or text a photo of your range and the model-number plate (typically behind the lower drawer or on the side of the storage area).
If you smell gas, leave the home right away. Don’t flip switches, use a phone or light anything inside. Call SoCalGas at 1-800-427-2200, or 911, from a safe place outside, whether the smell is faint or strong, and book the repair only after the gas company has confirmed the home is safe. See About Epic Star for business information.
Recent jobs we've documented
-
Beverly Hills
Bertazzoni burner that went silent
- What the customer saw
- In Beverly Hills, the left rear burner on a Bertazzoni gas range wouldn't click. The other knobs did.
- What we found
- Its spark switch, the small part on the valve stem that signals the spark module, wasn't closing its brass contacts when the knob was pushed.
- What we did
- The contacts were cleaned and the same switch went back on the stem. The burner clicks again, with a blue spark at the electrode, and no part was replaced.
-
Hollywood Hills
Thermador range showing E0210
- What the customer saw
- In the Hollywood Hills, a Thermador range showed E0210 after its top was cleaned. The two far-left burners and both ovens didn't work, and a power reset didn't help.
- What we found
- Under the center cooking section, which lifts up without unscrewing the burners, the Wi-Fi module was corroded by cleaner and water that had run through the gaps.
- What we did
- The customer didn't use the Wi-Fi, so we unplugged the module. The error cleared, and the whole range worked again.
Real Stove & Range Repair in Los Angeles jobs we've completed



Issues we fix
-
Gas burner not igniting
Possible causes:
- Igniter (spark module) failed or wet
- Burner cap misaligned
- Spark electrode dirty or carbonized
- Spark switch on the burner's valve stem not closing its contacts (one burner silent, the others clicking)
- Gas supply issue (low pressure)
- Burner port clogged
-
Gas burner has weak / yellow flame
Possible causes:
- Burner port clogs from spilled food
- Air shutter misadjusted
- Gas regulator issue
- Wrong gas type configuration (LP vs natural)
-
Electric burner not heating
Possible causes:
- Burner element burned out
- Infinite switch (control) failure
- Receptacle / terminal block burned
- Surface element wiring issue
-
Induction cooktop not recognizing pans
Possible causes:
- Pan not magnetic (induction requires ferrous)
- Induction coil failed
- Control board / sensor failure
- Pan smaller than minimum size for the burner
-
Control knob loose or won't turn
Possible causes:
- Knob shaft worn or stripped
- Valve stem broken (gas)
- Infinite switch worn (electric)
-
Error code on the display, with some burners or the oven not working
Possible causes:
- Control board or wiring fault
Frequently asked questions
How much does stove or range repair cost in Los Angeles?
It depends on the part: a gas igniter, an electric surface element, an infinite switch or control, or an induction coil. Wolf and Viking premium-range repairs can cost more than mainstream ones because of parts. The technician quotes after diagnosis, and the $85 service call is credited toward the completed repair.
Do you repair Wolf and Viking ranges?
Yes: Wolf (dual-fuel ranges, gas ranges, induction) and Viking Professional ranges, in Beverly Hills, Bel Air, Brentwood, Pacific Palisades and across Los Angeles. Issues we service include a weak igniter (Wolf gas tops), spark module failure, oven temperature drift, the control board and the door hinge spring. Parts ship from Sub-Zero Group (Wolf) and Middleby (Viking).
Why isn't my gas burner lighting?
Check the simple things first: with the range off and cool, clean and dry a dirty or wet igniter electrode and reseat a misaligned burner cap; that can fix it. If the burner still won't light, the igniter (spark module) may have failed. If you hear clicking but no spark, it's electrical. If no burner clicks, check the range's breaker first; with power present, the spark module or its control is next. If only one burner stays silent while the others click, that burner's spark switch is one of the parts a technician checks: on a Bertazzoni in Beverly Hills, cleaning its contacts brought the click back.
Can you repair induction cooktops?
Yes. Induction units are more complex (sealed coils, high-voltage control boards) and parts cost more, but repair is feasible. Bosch, Thermador, Wolf, Miele induction units we service routinely. Note: induction coils and power boards are costly parts, so on older units we evaluate replacement economics carefully.
My Wolf range knob is loose — can it be fixed?
Yes, but the cause matters. If the knob spins but doesn't turn the valve, the valve stem is broken and the valve gets replaced, which is internal valve work. If the knob just feels loose on the shaft, it can be a set screw or a worn knob bezel, a much smaller fix.
Can cleaning my range cause an error code?
It did on a Thermador range in the Hollywood Hills. Cleaner and water used on the top ran through the gaps onto the Wi-Fi module under the center section and corroded it. The range showed E0210, and the two far-left burners and both ovens stopped. Unplugging the module, which the customer didn't use, brought the whole range back. Spray the cleaner on a cloth, not on the range.
Should I repair my stove or replace it?
Premium ranges (Wolf, Viking, Thermador, Bertazzoni): repair almost always wins, given what a replacement costs. Mainstream ranges (Samsung, LG, GE, Whirlpool, Frigidaire) under 8 years old, repair usually makes sense; compare the quote with replacement cost. Over 10 years old or major issue, replacement usually wins.
Google reviews
★★★★★
Eric had a great and warmness about himself, efficient and knowledgeable awareness of the issues. Had accessed and completed the task in a minimal amount of time (12 minutes)
★★★★★
Refrigerator was checked thoroughly and repair ok ok
★★★★★
I’m very glad I had Ivan come to clean the extremely dirty hood over my stove. He came the same afternoon and did a very thorough job. After seeing how much work it was, I was very pleased with the price he charged me. I would definitely recommend this company.
Book a diagnostic/repair visit
Ready to book Stove & Range Repair in Los Angeles?
Or text a photo of your appliance so we can bring the right part.