Skip to main content

Bosch heat-pump dryer showing error dr in North Hollywood: lint slime in the condensate tray

This dryer couldn't pump out its own water. Behind a hatch at the bottom, lint and water had turned into a gunk that clogged the drain and the pump.

November 8, 2026 · 3 min read · By Epic Star Service Team

Watch: a real Los Angeles repair

Bosch heat-pump dryer showing error dr in North Hollywood: lint slime in the condensate tray
Bosch heat-pump dryer stacked on top of a Bosch washer inside a wood cabinet
In this guide

This dryer couldn’t pump out its own water

This Bosch heat-pump dryer in North Hollywood was showing error dr. On this dryer, all the water from the laundry runs down into a condensate tray at the bottom, and a drain pump is supposed to move it out from there. The pump couldn’t drain the tray.

Access is at the bottom

To reach that tray, you go in from the bottom of the dryer. The lower parts have to come out first. We set a light inside, then opened a hatch and got the camera in.

Gloved hand and a light at the open bottom compartment of a Bosch heat-pump dryer.

Gray lint, sitting in water

See the bottom of the tray? That gray stuff is lint, sitting in water.

Close-up of wet lint covering the condensate tray of a Bosch heat-pump dryer.

Mixed together, lint and water turn into a snotty gunk, almost like mold. It clogs the drain and the pump, so the pump can’t move the water out of the tray. That’s where the dr came from on this dryer.

You’ll see different causes for this code online, and Bosch’s US error-code page ties DR to the door or the door switch. A dr can also come from a clogged drain line or a bad drain pump. On this dryer, it was the tray.

Here’s how the tray looked when we opened it.

Condensate tray of a Bosch heat-pump dryer before cleaning, with lint and water in it.

Getting it out with wipes

We got it all out with wipes. What came up on them looked like some kind of fungus or mold. We have no clue what it was.

Dark slime and lint on a wipe held in an orange-gloved hand.

This is what was clogging the pump. We kept going until the last of the lint came out on a wipe.

Last bits of lint on a white wipe lying on the open flap of a Bosch heat-pump dryer.

Clean enough for the pump to drain

With the camera back inside, the bottom of the tray was clear. Here’s the after photo. The tray’s not sterile, but it’s clean enough for everything to work normally.

Condensate tray of a Bosch heat-pump dryer after cleaning, with a few drops left.

The test: soaking-wet laundry

To check our work, we started the dryer with a load of laundry soaked on purpose. We wanted to see the water get there and the pump move it out. To speed that up, we poured water from a bottle into the tray.

The pump kept up, and error dr was gone.

Bosch heat-pump dryer running during the test, with the door and display visible.

Clean this tray from time to time

Water from the whole dryer drains into this tray, so it needs cleaning from time to time. If your dryer shows dr, tell us what’s on the display when you call. For more on what lint does inside a dryer, see our dryer maintenance guide.

Two more jobs from the laundry room: an LG stacked washer in Burbank with an OE error and an Electrolux gas dryer locked up by a cloth in its blower wheel.

Dryer repair in North Hollywood

We repair Bosch dryers and other appliances in North Hollywood and across Los Angeles. Read more about our dryer repair service, or see the North Hollywood service area. CA BEAR registered (#A 50636). Call or text (213) 205-2055.

FAQ

What does error dr mean on a Bosch heat-pump dryer?

You'll find different causes listed online, and Bosch's US error-code page ties DR to the door or the door switch without saying which models. On this dryer it was a drain problem: the dirty condensate tray clogged the drain and the pump. A dr can also come from a clogged drain line or a bad drain pump. Once we cleaned the tray, the error was gone.

Where does the water go in a heat-pump dryer?

On this Bosch, all the water from the laundry runs down into a condensate tray at the bottom, and a drain pump moves it out from there.

What's the gray slime at the bottom of my dryer?

On this dryer it was lint sitting in water. Mixed together, it turns into a snotty gunk, almost like mold. We don't know exactly what it was. On the wipes it looked like some kind of fungus or mold.

How do you get to the condensate tray?

Access is at the bottom. On this dryer the lower parts have to come out first, and then there's a hatch to open.

Does the tray have to be spotless?

No. We left this one clean enough for the pump to drain.

How do you test the pump after cleaning?

We started the dryer with a load of laundry soaked on purpose, to check that the water gets to the tray and the pump moves it out. To speed it up, we poured water from a bottle into the tray.

How often should this tray be cleaned?

From time to time. We can't give you one number from this job. If dr comes back, that tray is the first place we'd look.

Do you repair Bosch dryers in North Hollywood?

Yes, in North Hollywood and across Los Angeles. Call or text (213) 205-2055, and tell us what the display shows.

Got an appliance that needs fixing? We cover LA and the Valley.

Call (213) 205-2055 or text a photo of your appliance.