LG stacked washer with an OE error in Burbank: new drain pump, dryer on top
Same code as our first LG OE case, harder access. The filter was clean, so the pump was bad, and the whole stack rolled out on sliders to reach it.
Watch this repair on its own page
In this guide
Same OE code, a harder way in
This is the second LG washer with an OE code on our blog. The first one, in Playa del Rey, came down to a failed drain pump. This time it was an LG WM8100HVA front-loader in Burbank, and this one sits under a dryer.
The code and the cause matched. Getting to the pump took more work.

What OE means on an LG washer
OE is LG’s drain error. The washer tried to pump the water out and couldn’t, so it stopped and showed the code, with water still sitting in the drum. It can come from the drain pump filter, the drain hose or the drain pump itself. Our LG washer OE error page has the short version.
Both LG OE jobs we’ve documented, the one in Playa del Rey and this one, needed a new drain pump. Still, the filter and the hose are the easy checks, so start there.
The filter was clean
I checked the filter as well. Nothing in there. With a clean filter, the pump itself was the likely culprit, and the new pump settled it: on the test cycle the water went out.

Getting to the pump with the dryer on top
On its own, a washer pulls out from the wall and opens up. A stacked pair is one tall, heavy unit, and the dryer sits right on top of the washer.
So I set the pair on sliders and rolled the whole stack out to get to the back. From there, the washer’s top panel came off from the back, then the front panel. That opened up the drain pump.


New pump, then a test cycle
With the new drain pump in, the washer went back together. Then we fired it up. The water went out, the floor stayed dry, and OE didn’t come back.

Leave room behind the stack
After the test, the stack went back in with a little room left behind it for the hookups.
Behind a washer and dryer you’ll find the water lines, the drain hose, power cords and the dryer vent. Push a stack tight against the wall and one of them can get pinched. A kinked drain hose can bring the same OE code right back.
If your stacked LG shows OE
Before you reset anything, snap a picture of the code on the display. The drain pump filter sits behind the little access panel low on the washer’s front. Turn off and unplug the washer. Let hot water cool, then drain residual water through the emergency drain hose into a shallow container before loosening the filter; follow your model’s manual. Keep a towel under the panel for whatever is left, then open the filter. A clogged filter may be the whole fix.
Filter clean? Look for a kink in the drain hose behind the washer. On a stack it can hide out of sight. With a clean filter and a clear hose, OE points to the pump, and getting to it on a stack means rolling the pair out and opening the washer from the back and the front. That’s a good point to call us.
LG washer repair in Burbank
We repair LG washers in Burbank and across the San Fernando Valley, stacked pairs included. The $85 service call is credited toward the repair if you go ahead, and repairs carry a 30-day labor warranty and a 90-day warranty on parts we supply. CA BEAR registered (#A 50636). Book a washer repair or call (213) 205-2055. More jobs nearby: LG appliance repair in Burbank and the Burbank service area.
FAQ
What does OE mean on an LG washer?
It's the code an LG washer shows when it can't pump the water out, so the cycle stops. It can come from a clogged drain pump filter, a kinked or blocked drain hose, or a failed drain pump.
Can a failed drain pump cause OE on an LG washer?
Yes. It was the drain pump on both LG OE jobs we've documented. On this WM8100HVA in Burbank the filter was clean and a new pump fixed it, and our first case, in Playa del Rey, needed a new pump too. The filter and the drain hose are still worth checking first.
How do you reach the drain pump on a stacked LG washer?
On this job the whole stack went on sliders and rolled out so we could get to the back. The washer's top panel came off from the back, then the front panel, and that opened up the drain pump.
Why leave space behind a stacked washer and dryer?
The hookups are back there: water lines, the drain hose, power and the dryer vent. Push the stack tight against the wall and one of them can get pinched, and a kinked drain hose can bring OE back.
How did you check the repair?
We ran a test cycle before pushing the stack back. The water went out, the floor stayed dry, and OE was gone.
Do you repair LG washers in Burbank?
Yes, stacked pairs included, across Burbank and the San Fernando Valley. The $85 service call is credited toward the repair if you go ahead, and repairs carry a 30-day labor warranty and a 90-day warranty on parts we supply. Call or text (213) 205-2055.
Got an appliance that needs fixing? We cover LA and the Valley.
Call (213) 205-2055 or text a photo of your appliance.