Skip to main content

A built-in Miele side-by-side that stopped cooling under a sheet of ice

Sherman Oaks, June 2026. The freezer section was frozen over and the evaporator fan had stopped. A full defrost, a new fan and a new drain-pan heater got it working again.

October 20, 2026 · 5 min read · By Epic Star Service Team, California BEAR-registered, EPA Section 608 Universal certified

Built-in Miele side-by-side refrigerator with white panel-ready doors and a through-door ice and water dispenser in a kitchen
In this guide

A Miele that stopped cooling

In June 2026 we got a call from a customer in Sherman Oaks. Their kitchen has a built-in Miele side-by-side refrigerator. Its doors are panel-ready, so they match the white cabinets, and the freezer door has an ice and water dispenser.

The refrigerator had stopped cooling. When we opened the freezer section, everything inside was frozen over.

What we found behind the freezer panel

The ice wasn’t just on the food and the shelves. The evaporator, the coil that makes the cold, was iced up. The evaporator fan had stopped working too.

Opened freezer section of a Miele built-in refrigerator with the evaporator coil exposed and a gloved hand holding the plastic drain pan with its foil heater

Why ice on the evaporator stops the cooling

This part is a general explanation of how a frost-free refrigerator works, not a measurement from this job.

The evaporator sits behind a panel in the freezer. Refrigerant inside it makes the coil cold, and the evaporator fan pulls air across the fins and pushes it out to the food. Air is what carries the cold from the coil to the shelves.

That’s why a refrigerator can stop cooling even when the sealed system is fine. Some frost on the coil is normal, and a defrost cycle melts it off every so often. If the ice keeps building, it fills the gaps between the fins and the air can’t pass. A fan that doesn’t turn does the same damage from the other side: the cold stays at the coil. Ice can also grow around a fan blade until it can’t spin.

How the drain-pan heater fits in

When the defrost cycle runs, the frost on the evaporator melts and drips into a drain pan under the coil. From there the water runs out through a drain. That pan is inside a freezer, so it needs help to stay above freezing.

That’s the job of the drain-pan heater. On this Miele it’s a foil heater bonded to the plastic drain pan, and the part comes as one assembly: heater and pan together. If a pan heater stops doing its job, melt water can freeze in the pan instead of draining, and the next defrost has more ice to deal with.

We don’t have test readings from this job, so we’re not going to claim how the old heater failed. Here is what we replaced.

Gloved hand holding the drain pan and heater assembly together with the evaporator fan housing in front of an open Miele freezer door

What we did

First we defrosted the refrigerator completely, so no ice was left on the evaporator or around the fan. Then we replaced the evaporator fan and the drain-pan heater. On this Miele that second part is the heater and the plastic drain pan as one piece.

After that the Miele worked normally again.

When to call about an iced-up freezer

Call a technician if the freezer has thick frost on the back wall, or if the fresh-food side is warm while the freezer still has ice in it. Until someone looks at it, keep the doors shut as much as you can. Please don’t hack at the ice: the evaporator tubing is thin, and a puncture means a refrigerant leak.

A built-in like this Miele sits inside the cabinetry, so the repair happens from the front with the freezer emptied. Tell us when you call that the freezer is iced over; it helps us plan the visit.

Miele refrigerator repair in Sherman Oaks

We repair built-in Miele refrigerators in Sherman Oaks and across all of Los Angeles: the San Fernando Valley, Hollywood and Mid-City, the Westside, and the beach cities and South Bay. See our refrigerator repair in Sherman Oaks page, our refrigerator repair service and our Miele appliance repair page. For another Sherman Oaks refrigerator, read about a GE Profile with a lit interior and a dead display. The service call is $85, credited toward the repair. CA BEAR registered (#A 50636), EPA Section 608 Universal certified. Call or text (213) 205-2055.

FAQ

Why is my freezer iced over while the refrigerator isn't cooling?

In a frost-free refrigerator the cold is made at the evaporator coil behind the freezer's back panel, and a fan moves air across that coil to the food. When the coil is packed with ice, air can't get through it, and when the fan stops, nothing moves the air at all. On this Miele in Sherman Oaks both had happened: the evaporator was buried in ice and the evaporator fan had stopped working.

What does a drain-pan heater do?

During a defrost cycle the frost on the evaporator melts and drips into a drain pan under the coil, then runs out through the drain. The pan sits inside the freezer, so a small heater keeps it warm enough for that water to leave before it freezes. On this Miele the heater is a foil heater stuck to the plastic drain pan, and the two come as one assembly.

Can I just unplug the refrigerator and let the ice melt?

A manual defrost may bring the cooling back for a while, but it doesn't replace a fan that has stopped or a defrost part that isn't doing its job, so the ice can build up again. Don't chip at the ice with a knife or a screwdriver. The evaporator tubing is thin, and a puncture turns an airflow repair into a sealed-system repair.

Did you test the old drain-pan heater?

We don't have test readings from this job, so we won't claim how the old heater failed. What we can tell you is what we did: a complete defrost, a new evaporator fan, and a new drain-pan heater with its pan. The refrigerator worked normally afterwards.

Do you repair built-in Miele refrigerators in Sherman Oaks?

Yes, in Sherman Oaks and across Los Angeles. The service call is $85 and is credited toward the repair. Repairs carry a 30-day labor warranty and a 90-day warranty on parts we supply. Call or text (213) 205-2055.

Got an appliance that needs fixing? We cover LA and the Valley.

Call (213) 205-2055 or text a photo of your appliance.