Updated November 2026
Do you repair built-in Dacor column refrigerators?
Yes, we repair them. When a Dacor column refrigerator loses temperature, we work the diagnosis in order — evaporator fan and defrost circuit first, then the sealed system and its refrigerant charge. Handling that refrigerant requires the EPA Section 608 certification we hold, so recovery and recharge stay in-house rather than subcontracted.
A built-in Dacor side-by-side we serviced
In September 2026 we serviced a built-in Dacor side-by-side in Encino that was making noise. It’s a 42-inch model with a through-door dispenser. Inside the freezer section the evaporator fan was iced over and its blades were hitting the ice, and an insulated tube above the evaporator cover was coated in ice too. We defrosted it completely and the noise was gone. No parts were replaced, and we didn’t determine why the ice had built up. The photos from that job are on this page. More Encino refrigerator work is on our refrigerator repair in Encino page.
Dacor appliance repair across Los Angeles
Dacor is the American luxury kitchen brand born in California in 1965 — known for its dual-fuel ranges, Discovery and Modernist wall ovens, and column refrigeration. In 2016 Samsung acquired Dacor, and the newer Modernist line now blends Dacor’s professional cooking hardware with Samsung’s smart electronics. That history matters for repair: a 2010 Discovery oven and a 2022 Modernist oven are diagnosed differently.
Epic Star services Dacor appliances across Beverly Hills, Bel Air, Brentwood, Pacific Palisades, Santa Monica, and Sherman Oaks. Dacor’s engineering follows the premium pattern — durable mechanical components paired with electronics that need periodic attention.
Two generations of Dacor
Pre-2016 Dacor (classic Discovery, Epicure, Renaissance) uses the original Dacor control architecture. Post-2016 Modernist models share Samsung-derived smart boards, touch panels, and connectivity — which means the same error-code diagnostic skill we apply to Samsung ranges and refrigerators transfers directly. We service both generations and identify which architecture your unit uses from the model number.
Where Dacor appliances fail
The mechanical side of a Dacor range — brass burner valves, stainless surfaces, oven hinges — is built for a long service life. Electronic parts we replace include spark modules and igniter electrodes on gas and dual-fuel ranges, temperature sensors and bake elements in wall ovens, and main control boards, including the Samsung-derived boards on Modernist units. Column refrigeration depends on clean condenser coils; in LA’s dusty, dry climate, skipped maintenance can strain the compressor early.
Diagnostic-first pricing
We diagnose before we replace. Sealed-system refrigeration work on Dacor columns requires EPA Section 608 certification; we hold it at the Universal level. The $85 service call is credited toward the repair, and you get a flat-rate quote before any work begins — including the cost of premium Dacor parts so there are no surprises.
Call (213) 205-2055
Or text a photo of your Dacor appliance and the model-number plate (door frame or behind the kickplate for ranges and ovens; inside the cabinet for column refrigeration).
Recent Dacor jobs

Dacor issues we fix
-
Dacor wall oven not heating / temperature drift
Discovery and Modernist wall ovens can develop temperature sensor (RTD probe) drift or a failed bake element, causing slow preheat and uneven baking. Diagnosis distinguishes element vs. sensor vs. control board.
-
Dacor range igniter / spark module failure
Gas and dual-fuel ranges with weak spark or burners that click without lighting. Causes we check: a spark module (igniter electronics), carbonized electrodes, or a burner cap reseated incorrectly after cleaning.
-
Dacor Modernist smart control board failure
Post-2016 Modernist models use Samsung-derived smart electronics. A failed main control board affects display, touch panel, and connectivity. We diagnose using Samsung-style error-code logic.
-
Dacor column refrigerator not cooling
Built-in column refrigeration with evaporator fan failure, sealed-system refrigerant leak, or compressor issues. Sealed-system work requires EPA Section 608 certification; we hold it at the Universal level.
-
Dacor dual-fuel range convection fan noise
Whining or grinding from the electric oven cavity during convection. Convection fan motor replacement is a standard Dacor service on dual-fuel ranges.
Frequently asked questions
-
Is Dacor still made — and does Samsung ownership change repairs?
Yes, Dacor is still produced. Dacor was founded in California in 1965 and acquired by Samsung in 2016. The practical effect for repairs: newer Modernist-line models use Samsung-derived smart electronics and diagnostic logic, which we know well. Older pre-2016 Discovery and classic Dacor models use the original Dacor architecture. We service both generations.
-
Is Epic Star an independent Dacor repair company?
Yes. We're an independent repair company and service Dacor appliances across Los Angeles, with a written quote before any work starts.
-
Do you carry Dacor parts?
We stock common Dacor parts in our service van: spark modules, igniter electrodes, oven temperature sensors, bake elements, and convection fan motors. Less common parts — including Modernist smart boards and column refrigeration components — are ordered from Dacor/Samsung distribution; we tell you the expected arrival before ordering.
-
How long do Dacor appliances last?
Dacor ranges and ovens are built for a long service life. The cooking hardware (burners, valves, hinges) is heavy-duty; the vulnerabilities are electronic — control boards, spark modules, and temperature sensors. Column refrigeration lasts longer with proper condenser maintenance.
-
Can you service Dacor induction cooktops?
Yes. Dacor induction cooktops use inverter electronics; we repair individual induction coil modules and control boards. We carry diagnostic tools suited to Dacor induction architecture and quote the specific failed component rather than guessing.
-
My Dacor oven shows an error code — can you diagnose by photo?
Often, yes — especially on Modernist models that share Samsung-style error codes. Send a photo of the code on the display and a photo of the model-number plate (typically on the door frame or behind the kickplate), and we can frequently narrow the fault down and load the likely part before the visit. The price comes after the on-site diagnosis.
-
Service call cost for Dacor?
Standard $85 service call, credited toward the repair when you proceed. We provide a flat-rate quote before any work begins. Premium Dacor parts can raise the total — we show you the part cost so you can decide.
Google reviews
★★★★★
Eric had a great and warmness about himself, efficient and knowledgeable awareness of the issues. Had accessed and completed the task in a minimal amount of time (12 minutes)
★★★★★
Refrigerator was checked thoroughly and repair ok ok
★★★★★
I’m very glad I had Ivan come to clean the extremely dirty hood over my stove. He came the same afternoon and did a very thorough job. After seeing how much work it was, I was very pleased with the price he charged me. I would definitely recommend this company.
Book a diagnostic/repair visit
Talk to us about your Dacor repair
Or text a photo so we can bring the right part.